There are 82 comments
March 12, 2013 - 01:08 PM
I was wondering if you have an suggestions for my 03 Cobra. My instrument cluster lights have gone out. All other interior lights work properly as well as the dimming mechanism. Is it possible a fuse for the dash lights has blown? In addition, I doubt it coincides with the dash lights, but my boost gauge also is not functioning. Please let me know any useful incite you might have. You have a great site and I am appreciative of all the tutorials.
August 23, 2012 - 12:18 AM
Subject: LED Lights
You have a lot of great information here. Half of my cluster does not light up after I did the install. Is there a certain way they have to go in?
August 10, 2012 - 02:08 PM
Subject: Mustang 4.6 plenum
Excellent guide on fitting BBK. Helped me no end when stripping out to clean, thanks.
June 24, 2012 - 11:24 AM
Need to sell Nos 14lb thankful and hook ups for a mustang 150 dollars ask for Sam 865-395-3799
April 18, 2012 - 01:34 AM
Subject: About the led instrument cluster mod
On the mod you did with the instrument cluster is the back of the cluster blue or green film on a 2002 GT? I would really love to know to match my car. I would think taking all the needles off and scraping off the green tint would be a pain...
March 27, 2012 - 01:14 PM
Subject: 1973 Mustang Mach I Replacement
I have Fitted carpet and padding for a 1973 Mustang Mach I-It is Black with red inlay. I also have a replacement headliner, weather stripping and a rear window, etc.
March 11, 2012 - 03:23 PM
Subject: door pannel
October 13, 2011 - 01:56 AM
Nice job on the write ups
August 24, 2011 - 02:33 PM
Subject: 72 fiberglass tilt front clip
i have 72' fiberglass tilting front end for fastback i think! i'm asking 500.00 obo please call brian at: 412-655-2600
July 12, 2011 - 02:17 PM
Subject: clear headlights
theres an easier way to do the headlights so theyre clear and it will also be informative for ppl wbleepedhave the blacked stock headlights. instead of drilling in the back or the lights you take the front clear lens off this gives you access to the black slip that is in there and also access to the orange marker. its very easy and you dont have to worry about breaking the plastic in the back or scratching the lens. you use the dremel with the same blade you used and follow the lens all the way around then just simply take the lens off pull the black peice out and the orange. i myself used used jb weld also, but my buddy used an all purpose clear apoxy and looks way better than the jb weld. but whats done is done and im not redoing them
July 12, 2011 - 02:19 PM
the w wrod is supposed be " wbleepedalso have" my mistake
May 13, 2011 - 05:55 PM
Subject: i hope
i hope my 2002 gt tunes out as good as yours .starting to build my car .frist long tube & xpipe & FLOWS.then procharger.i will use your steps!you have a very nice stang!!!!!!!!!
October 13, 2010 - 02:59 AM
Subject: Another Mike Ford with a Mustang, 1991
Your site popped up in a search I was doing for obdII diagnostic tools. I'm Mike Ford as well, have a 1991 Mustang LX 5.0L and live in SoCal.
August 25, 2010 - 05:44 PM
Subject: 91 mustang complete R-end w/posi
good condition willing to part with at a reasonable offer call chris 916-993-6657
July 28, 2010 - 06:49 PM
Subject: Rear Seat Delete
This going to help me out alot. thanks alot for everything
July 29, 2010 - 10:42 AM
Subject: Re: Rear Seat Delete
Glad to help out, best of luck.
June 22, 2010 - 09:48 AM
Subject: Thank you
Thanks for helping out Mustang owners all over the world
July 29, 2010 - 10:43 AM
Subject: Re: Thank you
You're welcome. Glad to help out.
June 07, 2010 - 06:47 PM
Subject: Gauge cluster
The later clusters take a 74 bulb. I fount this out after ordering the 194 LED bulbs. But the 194 LEDs can go in the A/C controls and tag light.
July 29, 2010 - 10:44 AM
Subject: Re: Gauge cluster
Thanks for the info. I updated the write up.
March 25, 2010 - 04:20 PM
Subject: Mike Ford Rules
Mike ford Mustang ur the man!!
March 24, 2010 - 02:42 AM
whats up man seen you racein a cobra on youtube you had nitrous then..i have a 01 mustang gt automatic its all stock besides 373 gears i was wantin to put a 100 shot on her will it be safe on tha motor just dont wanna tear her up..what all was done to yours at tha time???great driven by tha way man
July 29, 2010 - 10:50 AM
Subject: Re: nitrous
Hey, thanks for the compliments. As long as you install the kit properly you should be alright. I would highly recommend getting your car tuned after you install the nitrous though, and you definitely should pick up a MSD Window Switch for extra safety for your motor. At the time when I ran a 12.1 I had long tubes, h-pipe, flowmasters, pulleys, plenum and throttle body. Best of luck!
July 12, 2011 - 02:03 PM
Subject: bad idea with stock intake manifold
the nitrouse with crack and shatter the stock intake manifold cause its plastic. i went to summit and ordered the trick flow. the cast aluminum manifolds arnt affected like the plastic stock ones. they work with stock fuel rails and after market fuel rails. i went with the 75mm thottle body from there also. hope this helps you
March 06, 2010 - 11:02 AM
Subject: Props to Mike
This has to be the most informational mustang website i have visited so far. AmericanMuscle is good, but this is incredible. There are instructions about how to replace parts, buy parts, clean parts, virtually everything important, and that might come up in the first few years of experience any mustang owner encounters.
March 13, 2010 - 08:29 PM
Thank you very much for the kind words, they are truly flattering. I am extremely glad I could have helped you out and hope you have as much fun in your Mustang as I do in mine. Thank you very much for the compliments, you certainly made my day!
January 21, 2010 - 09:27 AM
Subject: GREAT INFO
Thanks Mike for sharing this info, helped out alot.
January 20, 2010 - 09:08 AM
Just wanted to say, Thanks!
January 17, 2010 - 08:59 PM
Subject: shaker hood for sale on corral.net
Do you still have the mach1 shaker system for sale? Where are you located and do you have an email address?
January 17, 2010 - 09:03 PM
Subject: Re: Shaker
Yes I still have the shaker system for sale. I am located in New York State. Please contact me at mike[at]mikefordmustang.com
EDIT: 5/1/2010 - The shaker system is no longer available
January 10, 2010 - 04:29 PM
the stripes that had the pinstripes were ten inches? or the ones that were a bit more separated? Thanks!
January 05, 2010 - 06:46 PM
Subject: shaker hood
is the hood still for sale ?
January 05, 2010 - 06:51 PM
Yes the hood is still for sale. e-mail me... mike @ mikefordmustang.com
May 08, 2009 - 05:36 PM
bro super nice work! hey, what size stripes did you use?
October 01, 2009 - 09:36 AM
Subject: Re: stripes
Sorry for the delay. They were 10" stripes but they are long gone.
May 05, 2009 - 09:51 PM
looking foward to meeting all the other mustang lovers. HOW do you get your car so shiny???????
March 14, 2009 - 11:10 AM
hey i was wondering about the head lights that were put on the 2002 GT, are they just plug in ready to go or do i have to wire them in?..i wanted to get them but i didnt know if i had to wire them up or just plug them into my wiring harness..
March 14, 2009 - 08:40 AM
Subject: White Knight Lincoln
I would like to see the video of the 32ft lincoln on this site. I know its not a mustang but i feel it would add to the donut section of your videos.
March 07, 2009 - 12:00 AM
Awsome write-ups! very useful for any Mustang owner! thanks so much! Mustangs FTW (for the win)
February 26, 2009 - 11:01 PM
Subject: 87-93 HID lights
Love your website! BUT U HAVE TO MAKE ME OR SELL ME SOME HID LIGHTS LIKE THE ONES YOU MADE FOR THE FOXBODY! I SWEAR TO GOD THEY ARE LIKE THE BEST LOOKING LIGHTS EVER! LET ME KNOW ASAP! MAYBE JUST THE HEADLIGHTS NO PARKING LIGHTS. JUST THE MIDDLE! LET ME KNOW PLEASE. ASAP! THANKS! TAKE CARE...
February 22, 2009 - 02:01 AM
Hey great lookin car thanks for the really good info set up on the page, i jus bought my first mustang, it's a 97 cobra runs great but i can't wait to start instaling parts to it, thanks again for the info n set up of the page.
February 23, 2009 - 09:33 AM
Thanks for the compliments! Have any pics of your Cobra?
February 04, 2009 - 05:53 PM
Subject: GOOD INFO
Just wanted to say good info. Im jstang6969 from LoneStarStangs.com and came across the thread containing your site. Its very good info. Keep it coming man.
January 31, 2009 - 11:34 AM
I just wanted to thank you for a clean easy to understand web-site. It helped me a lot with my fornt brakes. Thanks again -Xavier Okc, OK
January 15, 2009 - 09:02 PM
Subject: Line loc
Just wondering if you installed this yourself and, if so, was it pretty easy?
January 16, 2009 - 10:42 AM
Subject: Re: Line Lock
Yes I have installed this myself on my car, and also on my friends car using the exact same directions. Works perfectly.
January 12, 2009 - 11:55 AM
January 12, 2009 - 03:29 PM
January 03, 2009 - 01:27 AM
Subject: New website
Cars looking great!
December 29, 2008 - 09:37 AM
mike,first of all great web site! i own a highly modified 04 mach 1, so i know just how much work, time and $$$$ you have in the car. the car looks great, it was worth it, great job.
December 29, 2008 - 10:19 AM
Thanks a lot man, I appreciate the nice words! I saw that you joined up on http://www.NewYorkMustangs.com, I look forward to some future meets and cruises w/ you!
December 06, 2008 - 06:47 AM
nice ride mike, im a big WV fan.
December 02, 2008 - 08:43 PM
Nice page had fun looking at it.. gave me a few ideas. thank you.
December 02, 2008 - 10:40 AM
Very nice car! Like the Cobra look and the Mach1 Shaker system. I recently put on 04 Cobra front bumper and found your post on corral.net and came here! Love the car and the work...
August 13, 2008 - 03:52 PM
Subject: Great site, thanks!
Hey, you have an awesome website. I'd like to thank you for all the hard work you put into it. Great information.
August 02, 2008 - 12:14 PM
Mike love the car, love the site and love all the information. Definitely an A+ job with everything.
July 24, 2008 - 03:54 PM
Subject: Thanks so much Mike!
Very helpful site! Mike has been extremely helpful providing feedback to my inquiries, as well as giving me some helpful hints to maximize my mustang's appearance.
June 30, 2008 - 12:09 PM
Car looks great and the the pics look awesome sweet location.
June 18, 2008 - 09:22 AM
Subject: Thanks Mike!
Thanks for all the help with the shift light install. Hope to see more updates on your stang.
June 10, 2008 - 06:34 PM
Let me get a ride...
June 07, 2008 - 10:58 AM
Subject: Nice car and site
Great looking car with some awesome mods. Will keep checking back for updates.
May 20, 2008 - 03:12 PM
Sweet...Thanks for the nice words man, I'm glad I could help!
May 20, 2008 - 12:23 PM
I just wanted to say Thank-You for providing such an informative website especially ALL about Stangs. You saved AT LEAST one person, me, from a lot of wasted money, time and labor.
May 20, 2008 - 03:12 PM
Great pictures. Awesome ride. I really appreciate your help pertaining to my own modifications.
April 24, 2008 - 05:39 PM
Yo do you feel or hear a difference? from the shaker
February 09, 2008 - 06:36 PM
Subject: Yeah L
Yeah Mike L, great car, great site.
July 24, 2007 - 08:00 PM
Awesome page man! Your car looks great and performs great, just judging by your videos that is! We gotta go up to the track again soon. Later
October 01, 2007 - 05:39 PM
Hey did you get the hood on yet?
July 24, 2007 - 11:45 AM
Looks nice, hope my thread can help this site out.
July 06, 2007 - 06:44 PM
Beautiful Mustang, love the Mineral Gray and Awesome website, love the picture gallery and layout.
June 20, 2007 - 04:05 AM
whoops cut my message off... Your car looks great, very clean looking.
June 20, 2007 - 04:09 PM
Your site looks good too, it has a nice flow to it. I appreciate all your help!
June 13, 2007 - 09:04 PM
Subject: Nice site
Your site looks good too, it has a nice flow to it. I appreciate all your help!
June 01, 2007 - 05:19 PM
Your car is hot, can I get your number?
May 20, 2007 - 12:06 PM
ask dad about my car...its sick fast now
April 25, 2007 - 11:43 AM
Subject: Get back
Mike I am getting the itch to get up to lebenon. Hurry back home so we can kick somebleepedat the track!
April 25, 2007 - 11:53 AM
looks good man, looks like i need to break out the 67 from storage.
March 13, 2007 - 07:50 PM
no move in with me and lets break things... like land speed records
March 01, 2007 - 11:00 AM
Mike, we gotta find Tyler and race that S4 of his.
February 26, 2007 - 12:14 PM
hey MIKE whats good kiddd, want to race this summer a REAL HONDA/ACURA??? im down if u are for fun or we can hussle a lil if u want also... hehehe
February 26, 2007 - 11:03 AM
dude that is so funny that other web site.
February 25, 2007 - 07:52 AM
Dude the car looks sick on the site nice job dude when you get back would u help me and do one on my car. your "and now i mean your car" no payment man looks like a really good camera was used. the pic quality is awsome.
Leave a Comment
Powered by TalkBack