I have a 2003 Mustang V6 Hood, I've bought another hood, so I would no longer be needing this one, just sitting in my back yard taking space. Selling it for $100 or trades for parts for my car! I can also take the hood to your house! (Depending how far you live) text me at: (323)519-7524

I have a new 6 point roll cage and k-member for sale. Make me an offer.

I have a left over 1970 Tilt Steering Column out of a Mach I from an old restoration project that I need to sell. $50 dollars plus shipping costs

Parts I'm selling are stock and have only 51,000 miles on them. Selling because I upgraded to performance parts. Ad is on sarasota/bradenton craigslist.

1) SUSPENSION: front and rear springs, shocks and struts, quad shocks, caster camber plates - $400 (OBO)
2) FLOOR MATS: driver and passenger - $40 (OBO)
3) HEADLIGHTS: new bulbs included - $50 (OBO)
4) PASSENGER SIDE TAIL LIGHT: like new - $25 (OBO)
5) DECK LID GAS SHOCKS: $20 (OBO)
6) 3rd BRAKE LIGHT: $20 (OBO)
7) GT FOG LIGHTS (FULL ASSEMBLY): $50 (OBO)
8) 2002-2004 GT VALVE COVERS: hardware and 1 gasket included - $100 (OBO)
9) MACH 1 BOTTOM GRILL LIP: brand new!!! - $40 (OBO)
10) STOCK COLD AIR INTAKE: filter included - $40 (OBO)
11) FRONT BILLET GRILL: from AmericanMuscle.com - $50 (OBO)
12) PASSENGER SIDE TAIL LIGHT: like new - $25 (OBO)
13) STOCK FUEL DOOR: $25 (OBO)
14) STOCK 5 SPEED SHIFTER: excellent condition - $65 (OBO)
15) 3.9 LITRE V6 THROTTLE BODY: $50 (OBO)
16) 281 WHEEL CENTER CAPS: from AmericanMuscle.com - $20 (OBO)
17) GT DARK CHARCOAL LEATHER SEATS: $900 (OBO)
- front seat foam included
- seats are in EXCELLENT condition!!!
- front and rear seats
18) stock 3.27 gears - $100 (OBO)
19) stock 4.6 L V8 throttle body and plenum - $50
20) stock intake manifold - $200

Text or call Nick if interested : (941)524-0404

THIS RALLY PAC IS IN VERY NICE CONDITION READY TO INSTALL !!!! CALL ME AT 313-363-3427

‘89 Mustang LX hatchback roller Gutted. Would make great drag car. Good body, decent paint. $800

For More info call or text Shawn @ 717-977-0854 Located 17202

‘87-‘93 Mustang GT tail lights $40
For More info call or text Shawn @ 717-977-0854 Located 17202

‘85-‘86 Mustang Gt steering column and wheel. Perfect condition $150
For More info call or text Shawn @ 717-977-0854 Located 17202

‘79-‘93 Mustang fender LH side, good condition $50
‘79-‘93 Mustang fender RH side, good condition $50

For More info call or text Shawn @ 717-977-0854 Located 17202

‘79-‘93 Mustang GT New 2.5" tail pipes for $80

For More info call or text Shawn @ 717-977-0854 Located 17202

‘79-‘93 Mustang New cervini fiberglass hatch
For More info call or text Shawn @ 717-977-0854 Located 17202

‘79-‘93 Mustang LX New 2.5" tail pipes for w/stainless tips $125

For More info call or text Shawn @ 717-977-0854 Located 17202

‘79-‘93 Mustang New flaming river manual rack 20:1 standard ratio
For More info call or text Shawn @ 717-977-0854 Located 17202

‘79-‘93 Mustang 5.0 Hooker super competition equal length shorty headers for $65
For More info call or text Shawn @ 717-977-0854 Located 17202

'68 Mustang Borg Warner 4 speed and hurst shifter $100

For more info Call or text Shawn @717-977-0854
located 17202

‘67 Mustang 3 speed and shifter $25

More info Call or Text Shawn@ 717-977-0854
located 17202

‘67 Mustang 3 speed and shifter $25

More info Call or Text Shawn@ 717-977-0854
located 17202

‘92 Mustang Gt Convertible, triple black, 5 spd. Fresh 306, built by Bobby Smith @ Smiths Racing Engines. Never fired up. Flat top pistons. Mild lift/hi duration hyd cam. E7 heads, ported and polished w 194 int valves, Screw in studs, guid plates, hardened push rods, Harland sharp roller rockers. BBK SSI intake. BBK fuel rails and pressure reg. Bbk 70mm throttle body. Cold air intake. Under drive pulleys, new radiator, BBK 155lph fuel pump, 3:73 gears, centerforce clutch. Summit clutch quadrant, Mac long tube header, 2c flowmasters, New tail pipes, new cervini Storman Norman hood, new cervini stalker front end, new clear headlights. Needs small misc interior pieces, needs paint, and a new black glass for the convertible top, also needs water pump, distributor, wires, plugs and battery. All other parts are there. Needs put together. $5000
More info Call or Text Shawn @717-977-0854 Located 17202

These are 409 stainless steel,2½" tubing with 4" polished tips. They were only used for 1000 miles. Jegs.com part #958-sfm60v. Asking $150.00 call or text Todd at (920)350-5127 Thanks!!!

2010 MUSTANG GT STOCK MUFFLERS.
$150 OBO

CALL OR TEXT
954 501 9371

Its a 94 to 96 mustang gt rear bumper i wrk at a body shop so that's how I got it there were two scratches on it so I sanded it out and reprimed the whole bumper.it is a factory bumper.im asking 200 obo my name is chase and u can contact me at 904-707-3431

{image}Mustang GT engine/transmission/shifter/clutch/computer/wiring harness complete. Pulled from my 2007 Mustang GT with 40,219 miles on it. Pulled and ready to go. Price is negotiable. I IWLL NOT USE PAYPAl. Absolutely nothing is wrong with engine. I pulled it and am building a carburated engine for it. It has FRRP cam.
Put GT into title or I wont respond. thanks 706-284-9617 text only I screen calls

For sale: pair of used heads, intake from 96 GT (2 valve). Engine had approx. 109k mi; in good running shape. I did a PI heads/intake swap. Heads could be ported for better performance. $100.00 for set.

Flowmaster delta 50 mufflers. about 1500 miles on them. no holes or dents just normal wear sound great.
$140 for pair

Flowmaster delta 50 mufflers, 1500 miles put on them, normal wear. no hole or dents, sound great.
$140 for pair

93 Cobra Motor for Sale. Runs very Good,Stock, Water Pump, and Engine Harness, and a few of the sensors are the only things needed to install Motor. Off of same car Complete Rear Axle with Brakes, and Front Spindles, Hubs, and Rotors with Brakes. Also set of 4 Wheels and Tires Original Cobra wheels with Goodyear Tires 17". I also have other misc. 89-93 5.0 parts, and 94-95 ABS cables. Call for more info 208-731-8021

8.8 ring an pinion new still in box,make an offer

I have a stock cd player from a 2006 v6 mustang. The player is practically new, I took it out the week I bought the car in 2006 and put in a Pioneer headunit; it has been sitting in my closet since. I am asking $100 or best offer. I am flexible.

I have a stock cd player from a 2006 v6 mustang. The player is practically new, I took it out the week I bought the car in 2006 and put in a Pioneer headunit; it has been sitting in my closet since. I am asking $100 or best offer. I am flexible.

NEW still in ford raceing box 94-95 SVO cobra intake manifold 5.0 liter 302.

$400.00 price is firm
buyer pays shipping
my location is madison wi 53704
images can be seen on madison craigslist

2000 Ford Mustang Performance Motor built to handle over 1000 horse power here are the specs
Complete Engine new parts custom made
Stroker Kit 307 Cu In All Billet internals
Crank Rods and Pistons 1,200 HP Safety rated
.020 overblockvrings, Custom gaskets, Custom Brg, Stainless valves, Comp Cams, Springs, Cobra Billet oil pump all new timing componets, CNC porting program by Patriot Performance, (ATI Billet Damper+ Hubs, Centerforce Clutch Kit 700 HP rating
Balanced and Blue Printed. Kenne Belle 2.1 Street Complete supercharger kit
motor has less than 2000 miles on it. Serios inquires only this is no junkyard engine this is a strong built fast motor
Only selling because son wrecked car and need to sell motor. Motor was untouched in accident
Asking 9,000 have over 15,000 in this motor and only had in for three months

2000 Ford Mustang Performance Motor built to handle over 1000 horse power here are the specs
Complete Engine new parts custom made
Stroker Kit 307 Cu In All Billet internals
Crank Rods and Pistons 1,200 HP Safety rated
.020 overblockvrings, Custom gaskets, Custom Brg, Stainless valves, Comp Cams, Springs, Cobra Billet oil pump all new timing componets, CNC porting program by Patriot Performance, (ATI Billet Damper+ Hubs, Centerforce Clutch Kit 700 HP rating
Balanced and Blue Printed. Kenne Belle 2.1 Street Complete supercharger kit
motor has less than 2000 miles on it. Serios inquires only this is no junkyard engine this is a strong built fast motor
Only selling because son wrecked car and need to sell motor. Motor was untouched in accident

does anyone have a 1999 to 2004 blackk hood? the whole thing mine is in really bad shape and im just looking around

Parting out my custom 5.0 good engine 53kmi. (773)344-6540 I can send pics

parting out 1979 mustang 53kmi. on engine,

parting out 78 mustang 2, fenders, doors ,running 302 engine n trans,t tops real nice red dash ,complete grill, bumpers, complete front suspension,too much to list, call or text 812-760 -9991

parting out ,fenders doors , running 302 engine n trans ,complete front suspension ,front grill , rear tail lights ,t topsreal nice red dash too mch to list

I have a decent pair of 87-93 Door shells $200.00.
I do have other used parts and reproduction parts call to see what you are looking for.

Call Debbie 814-838-8153.

Set of 4 late model Mustang OE rims 15x7 - Excellent condition with four BFGoodrich radial TA tires. Tires still have excellent tread....Asking $325.00 for the complete set.

i have a 1994 mustang with a 302 bore to a 306
holly 4 barrel with holly intake. msd ignition, coil and dest.
ford valve covers. t5 trans. body in god shape $3500

excellent condition and ready to ship, $125 plus shipping

excellent condition and ready to ship, $125 plus shipping

A set of brand new spring never used, cost about 350$ retail. I have a set for 150$ never used in box
Opalacus@yahoo.com

I have three 15" rims for Mustang..Best Offer Ready to Go!

Took them off of my 96 mustang $40 for both of them

I have a perfect aod trans for a 5.0 foxbody. The transmission has only 78k on it not abused. The car has always been garaged. Converting the car to a 5 speed. Nothing needed bolt up and go! contact aubrey.allport@gmail.com

... are on eBay and ends in less than four hours today, July 29th. Bid Now!

.

I have a 1995 Mustang GT wrecked. Engine and drive-train and suspension is all good. Frame damage on driver's side front end. Will need a tow. Make an offer

67-68 Mustang Fastback Louvers and Drain Boxes. In excellent condition. $399 for all plus shipping. Pictures available. Call Bill 727 343-4187

$500 OBO
Ad is on Craigslist, losangeles.craigslist.org

99-04 fiberglass cowl induction and ram air scoops, hood for sale 250 or best offer

We are turning our 2007 Mustang GT Premium into a SCCA race car and are parting out the entire interior, wheels and tires, from bumper assembly, rear spoiler and hood. The interior is black leather and exterior color is redfire metallic. All interior parts except dashboard are available. Wheels are very clean with new Toyo Proxes tires on them. Paint on exterior pieces is very clean. Call Jason at (530)400-1562 or e-mail for inquiries or questions.

05 STRUT TOWER BRACE (CHROME NEW STEEDA never used!) $100.00..
Foxbody parts, 79-86,
Brand new 82 Mustang GT AIR Dam (repop) $250.00
Complete Granatelli racing front suspension (NEW),
with coilovers (300# springs) and tokico struts, ureathane bushings and control arms,
this is new except for the struts, they have 1000 miles on them, complete
Poly bushings, this kit will relocate the front wheels in the wheel well, it's specifically for racing apps,
makes it steer better in racing application..$850.00....
Also have set of Maximum motorsport Front control arms, non-offset...(NEW)...$200
Crane Cams roller rockers 1.6 (silver) $125.00.
billet clutch quad and adjuster $40.00,
cooling fans SPAL $100.00 shroud 2500-3000 cfm each,30 min runtime
BLACK MAGIC-3000 cfm $300.00,
Aluminum Radiator 3 row, For foxbody 79-86, (900 miles) $130.00
billet 351W HEI Distributor, procomp,$50.00
AEROMOTIVE NEW A-1000 FUEL PUMP good to 1000 HP Per aeromotive.$300.00
fuel pumps edelebrock,procomp (new)
Aliminum valve covers polished sets SBF $40.00 each pair,
Custom Grant wheel $50.00...
Info center (2) GOES IN CONSOLE,
for 79-82 gt used but works perfect, $75.00 ea.,
Stock foxbody sunroof...$100.00
Complete summit gauge set, no senders, new $50 (tach, Speedo, oil, temp,Volts, fuel).. New installed then removed)
completely rebuilt 351w .040 over, new stock crank, xe284h comp cams, roller lifters,
edelebrock dual plane air gap, Aluminum valve covers, 28 oz. balance, eagle rods, forged pistons teflon skirts full float pins,All built with ARP bolts throughout,
reworked port matched and polished, cast iron FORD heads, 2.02/1.64's intake and exhaust.... longblock...minus carb and accessories...about 450 HP>
$3500.00 obo..
Need to clean out my Garage, to much stuff and no room...most stuff is pretty new
Most all this fits fox body and is relatively new stuff used very very little or not at all....
If more pics are required of any parts, let me know....

I am selling my 2011 Mustang Gt grill with fog lights. I replaced it with a custom Saleen grill and do not need th edold grill. It is in perfect condition. Asing $100 obo. Contact Jonathan at (901) 592-5387.

i have a 1999 35th anniversary hood and bumper and rear deck spoiler for sale they are white and the paint is in great Condition.hood for 350.00... rear deck spolier 100.00 and front bumper.. 200.00

Its cat back or headers back or the back end this is a great piece and has no rust in great shape

Fit 1994 - 1995 Mustang 5.0L

Bassani headers are created with optimum-length, mandrel bent 14 ga. carbon steel primary tubes and it's Extractor Collector induces a scavenging effect to further improve performance.

Features:
-Gasketless ball and socket connectors
-Industrial chrome plating offers long-term protection.

Instructions included!

Bolts and new gaskets included!

Used for less than 1,000 miles!

Headers are discolored, which happens with all chrome headers.

$384.95 New
Asking $275

200.00 new

This programmer has only been used for a month,i bought it from Jegs and they are $499 new,HyperTech says up to 20hp gain, i gained 60hp, went from mild passing gear to smoking the tire's at 45+mph, well after i experienced that i did a lot of motor upgrade's and am no longer to use the performance part of it,i am asking $400 but it is negotiable, but saying that ,please be within reason, this pup is practically new, contact me at geotman1@yahoo.com and i will tell you all about it or just go to Jegs.com, type in part number above and read up,thanks!!

Bumper was used for six months only installed dual exhaust soon after that. $200 or best offer. It is painted legend lime green

********** ROLLING CHASSIS ONLY NO MOTOR NO TRANSMISSION**********

NHRA CERTIFIED till 2013

Set up for Big Block

Art Morrison FULL CHASSIS...(Not
Back Halfed,Ladder Bars.Chrome Tubular A arms,Adjustable Coil Overs front and rear.

SGI.rack and pinion,wheelie bars,strange center chunk, 430 Gears -W- SPOOL
wilwood brakes,Lexan windows,

fiber glass one piece front,custom Hood,Lift off Doors,New 1/4 panels.
Roll cage,full Aluminum Interior,Kirkley seat with cover.

Weld Wheels,Tubbed with 32x14.5 Hoosiers & Hoosier drag front tires.

Ron Davis Radiator,Oil Cooler,fuel cell,Battery shut off jumper terminals.

All electronics 2 step module 7al msd pro-power coil delay box timing control.

3 gauges oil,water and fuel,all 25/8.. auto meter large tach with shift lite.

car has all top of the line parts

ALSO COMES with,Transmission Cross member,Drive shaft, spare hood,BIG Block Headders,and Mid plate,front & rear fiber glass bumpers.

MOTOR that WAS in the car
600 CUBIC INCH BBF
4500 STROKE SCAT 4340 CRANK
6.800 EAGLE ROD WITH L19 ROD BOLTS
4.603 JE PISTONS
A460 RACE PREPPED BLOCK 4.603 BORE
A460 HEADS PORTED BY HOLCOMB
TD SHAFT MOUNT ROCKERS
PREDATOR SOILD ROLLER
TFS DUAL FOUR INTAKE PORTED BY HOLCOMB
2)1150 DOMINATORS
BELT DRIVE DUAL DOWL
FLUID DAMPNER
MSD CRANK TRIGGER
PROFORM ELECTRIC WATERPUMP
SHEETMETAL MOROSO VALVE COVERS

Tranmission WAS
2 SP POWERGLIDE JW BELL PERCISION CONVERTOR 6 BOLT FOR TRANS BRAKE HUGHES PROTREE BRAKE
PRO PUMP ALL HARDENED PARTS

car Ran 8.20 @162mph with about 1000 HP.

Any Questions Feel Free to ask ....Thanks

******$7500 OBO Price is Negotiable.********

NHRA CERTIFIED till 2013

Set up for Big Block

Art Morrison FULL CHASSIS...(Not
Back Halfed,Ladder Bars.Chrome Tubular A arms,Adjustable Coil Overs front
and rear.

SGI.rack and pinion,wheelie bars,strange center chunk, 430 Gears -W- SPOOL
wilwood brakes,Lexan windows,

fiber glass one piece front,custom Hood,Lift off Doors,New 1/4 panels.
Roll cage,full Aluminum Interior,Kirkley seat with cover.

Weld Wheels,Tubbed with 32x14.5 Hoosiers & Hoosier drag front tires.

Ron Davis Radiator,Oil Cooler,fuel cell,Battery shut off jumper terminals.

All electronics 2 step module 7al msd pro-power coil delay box timing control.

3 gauges oil,water and fuel,all 25/8.. auto meter large tachwith shift lite.

car has all top of the line parts

ALSO COMES with,Transmission Cross member,Drive shaft, spare hood,BIG Block Headders,and Mid plate,front & rear fiber glass bumpers.

The Car had a
600 CUBIC INCH BBF with over a 1000 HP.

Tranmission
2 SP POWERGLIDE JW BELL PERCISION CONVERTOR 6 BOLT FOR TRANS BRAKE HUGHES PROTREE BRAKE
ALL HARDENED PARTS PRO PUMP

car Ran 8.20 @162mph with about 1000 HP.
Any Questions Feel Free to ask Thanks
******$7500 OBO Price is Negotiable.********

DO NOT PUBLISH MY EMAIL ADDRESS. THANK YOU.

Assorted 1968 Mustang Parts For Sale CHEAP!

Buy individually or receive discount from buying multiple parts. My wife says this stuff has to be out of our garage by the end of March, so HELP!

Prices are indicated below but will consider all offers!

Interior Carpet (Maroon) Brand New and still in the box � $100
Rear panels � $150 for set
Doors � $150 for set
Hood with chrome trim � $75
Front Grill � $75
Trunk Lid � $25
Valance � $50 for pair
Rear Balance � $25
Stone Deflector � $25
Bumper Brackets � $40 for set
Headlight Buckets � $150 for set
Air Cleaner � $25
Front & Rear Springs � $50 for set
Sway Bar � $25
Control Armrs � $25 for set of two
Interior Door Panels (Maroon) BRAND NEW! � $50 for set of two
(and get old set for free)
Bucket Seat Covers BRAND NEW! � $100 for set of two
Heater Box � $25
Wheels � $125 for set of four
V-8 Drive Shaft � $20
Quarter Panel Extensions � $50 for set
Tail Lights � $25 for set

Selling a used billet flow irs brace with hardware parts.

not sure how much but if interested please make an offer.

MUSTANG GT 4.6 MOTOR YEARS 99 TO 01 THIS IS A HYPERTECH POWER PROGRAMMER WILL MAKE YOUR CAR RUN QUICKER MORE HORSEPOWER AND BETTER GAS MILES TO.WORKS WITH AUTO/MANUAL TRANSMISSION TO! ASKING PRICE IS $285.00 [CASH ONLY] THEY SELL FOR AROUND NEW $400.00 PLUS TAX THIS ONE WILL DO THE SAME THINGS FOR LESS PRICE! I CAN INSTALL IT IF YOU NEEDING ME TO,MY TIME I CHARGE IS $35.00 IT TAKES ABOUT 30 TO 45 MINS TO INSTALL THIS PROGRAMMER INTO CAR. RECORD MESSAGE WILL GET BACK TO YOU!>>>>>>>>>>>>>> #314-839-4761

11 mustangs 64.1/2- 67
My grand pa was going to restore we have the cars and lots of parts Uranus and engines
Cheap call me for pics joey 615-506-5622

for sale 1965 mustang 260 engine,c4 transmission,radiator,engine brackets,power steering and generator. engine has 86,000 miles and doesn't smoke or burn oil. trans doesn't slip and works very good also.
can also here engine run.
asking $800 obo
please call 608-481-4549
thank you

Y high performance pipe with 2 cadaleter converters

This is for a set of 19 inch rims and tires pirelli off of a new mustang premium. I replaced them with aftermarket wheels and tires and they have only 2000 miles on them. Perfect Condition text or call me 9014517076 jack

2006 Premium wheels "Saleen look" FOR SALE 18x8.5 with 60 % rubber
Great Condition ... Show Condition... that come off a show Stang... asking $450

Complete set of 2008 Original Mustang Bullitt 18in wheel & tires...( 18 x 8in )...Less then 50 miles on all four ..... These are the original wheels that came on the car in 2008.....This intire set has never seen dirt / dust or rain of any kind......They have been stored and covered since 2008.... and ready to bolt on....Show condition!...$800 ronaldbottjr@aol.com

{image}

Complete set of 2008 Original Mustang Bullitt 18in wheel & tires...( 18 x 8in )...Less then 50 miles on all four ..... These are the original wheels that came on the car in 2008.....This intire set has never seen dirt / dust or rain of any kind......They have been stored and covered since 2008.... and ready to bolt on....Show condition!

{image}

86-93 Cervini 'Stormin Normin' and stock hood for sale. Both in really nice shape. Three bills for the Cervini, 50 for the stocker.

I just purchased a 2012 Kona Blue V6 Mustang and decided to purchase new wheels and tires. So, they wheels and tires I had are now for sale.

One week after I purchased the vehicle I popped both back tires. So, the back tires are brand new and the front tires have only 7 thousand miles on them. Wheels are PERFECT condition.

Specs:

Wheels: 19 Mach/painted (black) alum wheels
Tires: 19 Pirelli Tires 255/40/ZR19

I will NOT respond to emails. If you are interested please call Rodney at 816-446-8446

blank crinkle aluminum ford raceing valve covers stock height. $100 obo. march 3pc underdrive v belt pully set 4 bolt crank. $150 obo. set of trick flow 1.6 3/8 stud roller rockers w locks. 200 firm on those used for break in thats it! trick flow set of 16 push rods 6.500 legth $50. Also have a set of 7.500. $50. set of stock 302 heads drilled for studs all new oversized valves springs everything $200. 66 mustang plastic gauge pod for dash new $20. pay pal and i will ship email me for pics and more info!

THANK YOU

I have 2 Mustang tail lights that came off of a 2001 Ford Mustang. I am asking 80$ O.B.O..Call or text 205-765-2644

For sale is a Roush part # 420025 High performance exhaust system for all 2010 v-8 Mustangs

Roush link -http://www.roushperformance.com/parts/Ford-Mustang-Exhaust-High-Performance-Off-Road-2010.html

MSRP: $599.99 plus shipping
My Price $400
Condition: Brand New, In Sealed Box never openend
Fits: 2010 Mustang GT 4.6L

Item Description:

Improve the power, fuel efficiency, and sound of your 2010 Mustang with the ROUSH® Ford Mustang Off-Road Exhaust System. The sound of this system generates a loud, throaty-sound. The mandrel bending process used for the tubes of this system maintains a consistent inside diameter through the bended area. This method allows for a significant increase in flow over stock/serrated-bent pipes. Due to this increased efficiency, both latent power and fuel efficiency are realized.

This Mustang exhaust kit is made of T-304 stainless steel, providing for resistance to corrosion and staining. This system features exhaust tips, mufflers, and required hardware for installation.

This exhaust system works with both the stock Mustang rear fascia as well as the ROUSH® Mustang rear fascia.

-Improves the power, fuel efficiency, and sound of your Mustang
-Works with 2010 Ford Mustang GTs
-Works with either the Mustang stock rear fascia or the ROUSH rear fascia
-More aggressive exhaust sound
-Made of T-304 stainless steel for resistance to corrosion and staining
-Mandrel-bent tubing for increased air flow
-Bolt-on axle-back exhaust system attaches to the factory midpipes and requires no cutting

rjj1901@gmail.com

For Sale:
New AJE Tubular K-Member for Mustang 96-04, for 4.6 l motor.

Asking: $295.00 OBO

Call: 636-349-2249

set of mustang seats black and grey leather came uiot of 03 mach had them in my 94 325 obo call 5183319650